its just a $3 12v meter i bought off of amazon.

 

Today I finally got around to replacing the front set of heims for Poly bushes on my billy 7100's. My truck drives like a dream again and the best part is, no more annoying rattle that somehow was louder than the truck itself, who would've thought. Tomorrow I will attempt to swap the t-case...

 

Got the steering damper bracket made and installed on the new steering

 

You and your lack of pics. Sheesh!!

 

Repaired my snow flake, recirculation, and rear ac buttons today! Gonna put them in tomorrow! !

 

I HAVE CRUISE CONTROL!!!!
For the first time in over 4 years I have a working cruise control in one of my Discos! This is quite the monumental achievement for me. I ended up replacing all the vacuum line and swapped in a D2 CC ECU as per Eric's instructions. Unfortunately it still didn't work. So I started pressing the switch in/out rapidly and the orange light started to come to life. If I held it just so it would stay lit. I set the CC and it held.
Just got done taking apart and cleaning the switch and I should be good to go for a long while.

 

for real, all of you need to get some Deoxit and spray all your switches. brought everything back to life in my truck.

 

Hmmmm. Seems like it would have a hard time reaching the contacts inside the housing. Plus it's $15 for a can. I cleaned the contacts with very fine sandpaper and bent them just a tad to more firmly make contact. Total time, less than 5 minutes.

 

I sprayed mine and through the gaps and pressed the button quickly a few times. stuff is magical, i usually use it for restoring old stereos/amps.

 

If I don't need to take stuff apart and deal with little springs and ball bearings (taking seat switches for example) I'm am all for spray and press. Magic is cool.