So what did you do to your Disco today?
#3302
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
Today I finally got around to replacing the front set of heims for Poly bushes on my billy 7100's. My truck drives like a dream again and the best part is, no more annoying rattle that somehow was louder than the truck itself, who would've thought. Tomorrow I will attempt to swap the t-case...
#3306
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
I HAVE CRUISE CONTROL!!!! ![Big Grin](https://landroverforums.com/forum/images/smilies/lxvR5hR.png)
For the first time in over 4 years I have a working cruise control in one of my Discos! This is quite the monumental achievement for me. I ended up replacing all the vacuum line and swapped in a D2 CC ECU as per Eric's instructions. Unfortunately it still didn't work. So I started pressing the switch in/out rapidly and the orange light started to come to life. If I held it just so it would stay lit. I set the CC and it held.
Just got done taking apart and cleaning the switch and I should be good to go for a long while.![Smile](https://landroverforums.com/forum/images/smilies/H5uKDcM.png)
![Big Grin](https://landroverforums.com/forum/images/smilies/lxvR5hR.png)
For the first time in over 4 years I have a working cruise control in one of my Discos! This is quite the monumental achievement for me. I ended up replacing all the vacuum line and swapped in a D2 CC ECU as per Eric's instructions. Unfortunately it still didn't work. So I started pressing the switch in/out rapidly and the orange light started to come to life. If I held it just so it would stay lit. I set the CC and it held.
Just got done taking apart and cleaning the switch and I should be good to go for a long while.
![Smile](https://landroverforums.com/forum/images/smilies/H5uKDcM.png)
![Name: IMAG2167_zpswesal5so.jpg
Views: 90
Size: 60.1 KB](https://landroverforums.com/forum/attachments/discovery-i-39/37284d1501367641-so-what-did-you-do-your-disco-today-imag2167_zpswesal5so.jpg)
Last edited by fishEH; 10-10-2014 at 08:21 AM.
#3308
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
Hmmmm. Seems like it would have a hard time reaching the contacts inside the housing. Plus it's $15 for a can. I cleaned the contacts with very fine sandpaper and bent them just a tad to more firmly make contact. Total time, less than 5 minutes.
#3309
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
I sprayed mine and through the gaps and pressed the button quickly a few times. stuff is magical, i usually use it for restoring old stereos/amps.
#3310