pulling the T case today
#11
#12
#13
#14
First Update, I found this lovely thing that is a little bit more specific than the RAVE
http://www.landroverresource.com/doc...Box_Manual.pdf
Second, turns out the bearing was ok. My transmission mounts were destroyed (despite being like 1 year old) and are most likely causing the vibration.
Third, the good news is I didn't have to pull the T-Box to replace the front output seal and the inspection plate seal.
Right now I have a nasty leak coming from the inspection plate for the CDL and with the way it is installed, I don't think I can get the bolts off with the transmission where it is. Might still need to drop the box.
http://www.landroverresource.com/doc...Box_Manual.pdf
Second, turns out the bearing was ok. My transmission mounts were destroyed (despite being like 1 year old) and are most likely causing the vibration.
Third, the good news is I didn't have to pull the T-Box to replace the front output seal and the inspection plate seal.
Right now I have a nasty leak coming from the inspection plate for the CDL and with the way it is installed, I don't think I can get the bolts off with the transmission where it is. Might still need to drop the box.
Thread
Thread Starter
Forum
Replies
Last Post