Transfer Case
#12
A 2002 should not have a CDL t-case in it OEM. But perhaps it was a CDL case from a 1999-2001 that replaced the OEM on the donor vehicle, same as you're doing now. Re-read DiscoMike's reply. But in any event, don't think there would be any compatibility issues. The 2002 wiring may still have the mate to the "extra" connectors for the donor t-case. Take a pic and post so we can confirm the extra connectors!!!
#14
CDL sensor. See attached 11 is for warning lamp and 12 is a detent plug. Looks like your donor may have had a CDL linkage installed in it's previous life. That empty bolt hole in the lower left of your pic should have a bolt in it. The bracket for the CDL attaches there using those bolt holes. Dismantler probably remove the shift linkage and left the holes empty.
#16
Hi mike. Only have one. After getting the new tranny and tcase installed, it wont go into gear - just high revs. It wont engage. What gives? Do i need to reprogram the computer? Please let me know. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post