What did you do with your DII today?
#2791
Last weekend was busy. Saturday I got my CB wired in. Power direct from the battery and grounded under the hood. Sunday I got the antenna installed. Used part of a Firestik door jamb mount, put it on the spare tire carrier. Ran the cable and ground wire through the rear window washer hole in the rear door, then ran the ground down the door jamb and under the bumper to the frame, and ran the antenna coax cable from thw rear door into the back cargo area, then under the cargo mat and rear seat to the center console. As I was soldering the plug onto the coax, the ceramic insulator on the plug broke... so I still don't have a working CB, but once I replace the plug, it will take me no time at all to get it working.
#2792
Yep back to putting it together
Put head bolts in passenger side the other day. Put head bolts on driver's today, well o.k. almost all. The bottom head bolt against the firewall needs about 15 more degrees and having trouble getting it tight with that little space. Using 6 pt socket but may have to resort to 12 if I can't get this to grab in a good spot. I wanted to get farther than that today but thats the way it goes.
#2793
Put head bolts in passenger side the other day. Put head bolts on driver's today, well o.k. almost all. The bottom head bolt against the firewall needs about 15 more degrees and having trouble getting it tight with that little space. Using 6 pt socket but may have to resort to 12 if I can't get this to grab in a good spot. I wanted to get farther than that today but thats the way it goes.
#2794
I changed transmission filter and fluid. I noticed on the wire harness along the drivers side of the tranny there are two wires hanging. One is brown the other brown with green strip. Looks like they have slip on connectors that go on to a sensor. Runs quiet but no 4th gear. Getting that incorrect 4th gear ratio. Any Input is appreciated
#2799
#2800