Help with secondary air

Reply Subscribe

Thread Tools

Search this Thread

Dec 2, 2018 | 03:01 PM

Alexrover

Thread Starter

2nd Gear

Joined: Sep 2018

Posts: 2

Likes: 0

Help with secondary air

trying to remove the heads on an 04 D2. Can’t get the damn secondary air injectors off. If I try to loosen the metal lines, the whole connector just turns. I’ve tried everything I can think of. Anyone have this issue before?

Dec 2, 2018 | 03:10 PM

Frtpilot

Three Wheeling

Joined: Oct 2018

Posts: 55

Likes: 5

From: Arizona

Use an 18mm crows foot to hold the block side bolt while you remove outside nut.

Last edited by Frtpilot; Dec 2, 2018 at 03:12 PM. Reason: Not finished

Dec 3, 2018 | 06:40 PM

The Deputy

Camel Trophy

Joined: Oct 2016

Posts: 4,863

Likes: 1,403

From: Michigan

Once you unbolt the exhaust manifolds (both sides) and let them drop out of the way...you can easily get a 18mm wrench in there to hold the head fitting. Sometimes, a small amount of heat helps too.

Brian.