Discovery I Talk about the Land Rover Discovery Series I within.

So what did you do to your Disco today?

Thread Tools
 
Search this Thread
 
  #3421  
Old 01-14-2015, 03:17 AM
jamesepoop's Avatar
Drifting
Join Date: Jan 2015
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by socal1200r
Took it to the dealer to get the CEL diagnosed and reset.

So I left the dealer, drove to work, topped off the gas tank, and no CEL. Then, 45 miles later, it's on again...ugh...
Get an obdII reader, scanner. Currently I have an ultra gauge ($65). My CEL went on for P0130. O2 malfunction: Bank 1, sensor 1. The CEL is specific. It's probable that other trouble codes will occur after repairing but it shouldn't cost you $170 to figure out.

Finished my modded carrier today, raised about .5" and spaced 1/8" from the gate
Name:  tDDQv2Qh.jpg
Views: 2
Size:  74.3 KB
 

Last edited by jamesepoop; 01-14-2015 at 03:20 AM.
  #3422  
Old 01-14-2015, 10:39 AM
WaltNYC's Avatar
TReK
Join Date: Mar 2010
Location: NYC
Posts: 2,423
Received 417 Likes on 349 Posts
Default

Originally Posted by jamesepoop
Get an obdII reader, scanner. Currently I have an ultra gauge ($65). My CEL went on for P0130. O2 malfunction: Bank 1, sensor 1. The CEL is specific. It's probable that other trouble codes will occur after repairing but it shouldn't cost you $170 to figure out.
This. A smart phone, a $5 app, and a plug into your OBDII ($10-30) are absolutely worth it. If you have a smart phone, it is the way to go. There are different varieties for android and iphone however.
 
  #3423  
Old 01-14-2015, 11:50 AM
fishEH's Avatar
Camel Trophy
Join Date: Nov 2009
Location: Lake Villa, IL
Posts: 4,076
Received 225 Likes on 194 Posts
Default

As others have mentioned, save yourself $170 for "diagnosis" and buy OBDII dongle and a $5 smartphone app.
For $224 you could replace all for sensors.
Oxygen Sensor OE Type NGK 25044 Fits 96 99 Land Rover Discovery 4 0L V8 | eBay

http://smile.amazon.com/NGK-25044-Ox...ords=NGK+25044
Originally Posted by socal1200r
Took it to the dealer to get the CEL diagnosed and reset. The code they pulled had something to do with a faulty heat circuit on one of the O2 sensors. At this point, they had the CEL reset at no cost to me. If I wanted them to chase it further, and determine which one of the four O2 sensors had the faulty heat circuit, that was going to cost $170, and I was going to have to leave it with them for a few hours.

Well, I figured getting the code read and getting the CEL reset at no cost was a good start. I told the service guy if the CEL comes on again, I'll call him and schedule an appt for them to do a more in-depth diagnosis, and hopefully it won't be difficult or expensive to fix.

So I left the dealer, drove to work, topped off the gas tank, and no CEL. Then, 45 miles later, it's on again...ugh...
 

Last edited by fishEH; 01-14-2015 at 11:54 AM.
  #3424  
Old 01-17-2015, 07:21 PM
MM3846's Avatar
Winching
Join Date: Feb 2014
Location: LI, NY
Posts: 619
Likes: 0
Received 11 Likes on 10 Posts
Default

fixed my rotted out driver's seat. pulled it out looking like this:
Name:  izqVAy0.png
Views: 2
Size:  1.97 MB

put it back in looking like this:
Name:  JI8ZbbG.png
Views: 2
Size:  1.75 MB

but why oh why did it rot out? this here be the culprit:
Name:  OPSvFSS.png
Views: 2
Size:  1.93 MB

lots o rot
Name:  Y5JDp5f.png
Views: 2
Size:  1.58 MB

cut out, new piece welded in
Name:  WLQEWm1.png
Views: 2
Size:  1.72 MB

found another small spot, fixed that too. rot also went through the door sill but i didn't feel like spending a lot of time on that, so i just cleaned it up and seam sealed it along with everything else
Name:  1oxFaWY.png
Views: 2
Size:  1.89 MB

after some rust convertor whatever primer and rust protector paint. who knows how good it is but its way better than it was
Name:  uSkYS4W.png
Views: 3
Size:  1.94 MB

also pulled and tossed most of the insulation. it was full of water and there was no way it would dry out. i'll put in some no-name dynamat in the spring.
 

Last edited by MM3846; 01-17-2015 at 07:23 PM.
  #3425  
Old 01-18-2015, 01:06 AM
USNAVYORDNANCE's Avatar
Rock Crawling
Join Date: Nov 2014
Posts: 308
Received 15 Likes on 15 Posts
Default

Took "War Machine" out wheelin'/shootin' today. First offroad test was better than I expected. These rigs wheel pretty good.
 
Attached Thumbnails So what did you do to your Disco today?-img_20150117_125752.jpg   So what did you do to your Disco today?-img_20150117_125830.jpg   So what did you do to your Disco today?-img_20150117_150325.jpg   So what did you do to your Disco today?-img_20150117_122726.jpg  
  #3426  
Old 01-18-2015, 04:50 PM
socal1200r's Avatar
Mudding
Join Date: Apr 2014
Posts: 173
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by USNAVYORDNANCE
Took "War Machine" out wheelin'/shootin' today. First offroad test was better than I expected. These rigs wheel pretty good.
Yikes...all those rocks and boulders out there probably don't make for a good backstop...are you shooting in a place where it's legal?
 
  #3427  
Old 01-18-2015, 04:55 PM
socal1200r's Avatar
Mudding
Join Date: Apr 2014
Posts: 173
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by fishEH
As others have mentioned, save yourself $170 for "diagnosis" and buy OBDII dongle and a $5 smartphone app.
For $224 you could replace all for sensors.
I don't have a smart phone (by choice), so that's not an option. I'm perfectly happy with my 3G flip phone, lol! I've also already replaced the Y-pipe with new cats, and all four O2 sensors, and the CEL is still going on. So I need to get the specific codes that are making the CEL go on, and go from there. 'Course I also replaced the stock ECU with a used one, as part of the diagnosis process with the CEL, and it may be throwing codes from the vehicle that this used ECU came out of. We'll figure it out eventually...
 
  #3428  
Old 01-19-2015, 11:39 AM
USNAVYORDNANCE's Avatar
Rock Crawling
Join Date: Nov 2014
Posts: 308
Received 15 Likes on 15 Posts
Default

Originally Posted by socal1200r
Yikes...all those rocks and boulders out there probably don't make for a good backstop...are you shooting in a place where it's legal?


^^ this guy....^^ beautiful spot with great backstops. Shooting my EBR & Remington 700 .308 sniper rifle at 400+ yards. Fun trip. Yes it's legal, no I won't give location. Border patrol buddy told me about it and to keep it hush hush.
 
  #3429  
Old 01-19-2015, 10:58 PM
USNAVYORDNANCE's Avatar
Rock Crawling
Join Date: Nov 2014
Posts: 308
Received 15 Likes on 15 Posts
Default

Serviced my t-case and diffs today. Also finished my double din stereo install (pioneer AppRadio). My fluid pump makes quick work of servicing in tight spaces. 3-4 pumps pumps out a quart and this thing holds 5 quarts. I used Lucas syn 75/90 + Lucas oil additve.
 
Attached Thumbnails So what did you do to your Disco today?-img_20150119_181258.jpg   So what did you do to your Disco today?-img_20150119_181804.jpg   So what did you do to your Disco today?-img_20150119_181837.jpg   So what did you do to your Disco today?-img_20150119_182000.jpg  
  #3430  
Old 01-26-2015, 07:40 PM
USNAVYORDNANCE's Avatar
Rock Crawling
Join Date: Nov 2014
Posts: 308
Received 15 Likes on 15 Posts
Default

Got some new ultra white bulbs for the Disco and I also wired in the trailer lights correctly.
 
Attached Thumbnails So what did you do to your Disco today?-img_20150126_163547.jpg   So what did you do to your Disco today?-img_20150109_141702.jpg  


Quick Reply: So what did you do to your Disco today?



All times are GMT -5. The time now is 06:31 PM.