What did you do with your DII today?
#7091
Potentially, Sport Mode even changes to a more aggressive fuel/air mapping or ignition timing.
It really wakes up my Crower performance cam in my 4.6!
The following 3 users liked this post by No Doubt:
#7094
The following 5 users liked this post by No Doubt:
jastutte (01-12-2020),
JUKE179r (01-10-2020),
Richard Gallant (01-09-2020),
Sixpack577 (01-10-2020),
whowa004 (01-10-2020)
#7096
I did the PCV 308 mod and I switched to Sport Mode.
My old valve cover breather tube was 100% blocked, so who knows how the engine was handling that excess gas pressure. Now with the new 308 PCV mod some of those oil fumes are going back into the air intake as the factory originally wanted and there shouldn't be any excess pressure in the valve covers.
...so that might help explain why my Crower performance cam seems to have woken up coincidentally with me switching to Sport Mode for 2020. Just spitballin' an idea here.
Fun either way, though!
The following users liked this post:
The_OGCJR (01-11-2020)
#7097
#7098
The following 2 users liked this post by The_OGCJR:
No Doubt (01-11-2020),
Sixpack577 (01-11-2020)
#7099
Speaking of power mods, I boosted the power of my engine by .... plugging in the MAF sensor. I have no idea how I was able to drive for the past week, but after cleaning the MAF I didn't get the connector clicked in all the way. Didn't notice b/c the CEL is on full time due to SAI delete. Engine ran a little rough on startup a couple of times, but once warm ran okay, but a bit sluggish.
After spending 87 million hours getting a laptop set up running XP and installing Delphi software to run my $50 CDP+ Autocom dongle, I checked codes and found the telltale p0102 and p1884. Yay OBD.
I checked ABS and got a couple of FL speed sensor codes and misc others. Cleared them, but my 3 faithful amigos were still there. The FL sensor codes are gone, but manufacturer code 115 is still there. Nobody on the Webz seems to know what this is. Some suggestions that it's a bad ground.
After spending 87 million hours getting a laptop set up running XP and installing Delphi software to run my $50 CDP+ Autocom dongle, I checked codes and found the telltale p0102 and p1884. Yay OBD.
I checked ABS and got a couple of FL speed sensor codes and misc others. Cleared them, but my 3 faithful amigos were still there. The FL sensor codes are gone, but manufacturer code 115 is still there. Nobody on the Webz seems to know what this is. Some suggestions that it's a bad ground.
#7100
I checked ABS and got a couple of FL speed sensor codes and misc others. Cleared them, but my 3 faithful amigos were still there. The FL sensor codes are gone, but manufacturer code 115 is still there. Nobody on the Webz seems to know what this is. Some suggestions that it's a bad ground.
All Disco 2 owners should perform Option B. Link is in my signature. Click it.
There's no downside. It fixes some problems and rules out others.
Same for the PCV 308 mod.
We can argue about the throttle body bypass mod and such, but the Option B and PCV mods are solid hits.
The following users liked this post:
Sixpack577 (01-12-2020)