When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I also really wanted a G4 especially that back in the day my local rover dealer actually had 3 or 4 of them as loaners. There's still some local in my area but I haven't seen them in years.
I also really wanted a G4 especially that back in the day my local rover dealer actually had 3 or 4 of them as loaners. There's still some local in my area but I haven't seen them in years.
There's a guy in the Land Rover Club of San Diego that has a G4. It's really nice.
Today we did City Creek (Big Bear) and Wildhorse Meadows( Big Bear).
City Creek was a great drive with good views, Wildhorse wore me out, it was 11 miles of rock garden.
Had to swap out the fusebox due to the AC blower motor not blowing. Big thanks to past posts to help track the problem down. This makes two fuseboxes on two different trucks I've had to replace due to two different problems. Makes me want to start stockpiling them from the junkyard for when they become hard to find!
Just got an FV308 pcv valve in. Is the valve inside supposed to be kind of loose or is it supposed to be spring loaded? I can hear a small metal piece moving inside the valve freely
Pcv mod done! Though looking at the old components I’m not sure I needed it lol.
How far did everyone thread their pcv on? It got a little tight about halfway down the threads but I got all the threads in without excessive effort before it finally stopped.
